Olympus SC1, Instruction Manual, Page: 98 / 121

App.
92
EMC information
SC-1 INSTRUCTION MANUAL

Guidance and manufacturer’s declaration — Electromagnetic
emissions
This model is intended for use by medical personnel in hospital environments and for use in the
electromagnetic environment specified below. The customer or the user of this model should
assure that it is used in such an environment.

Guidance and manufacturer’s declaration — Electromagnetic
immunity
This model is intended for use by medical personnel in hospital environments and for use in the
electromagnetic environment specified below. The customer or the user of this model should
assure that it is used in such an environment.
EMC information
Emissions test Compliance Electromagnetic environment — Guidance
RF emissions
CISPR 11
Group 1 This instrument uses RF (Radio Frequency) energy only for its
internal function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
Radiated emissions
CISPR 11
Class B This instrument’s RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Main terminal
conducted emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Class B This instrument’s harmonic emissions are low and are not likely to
cause any problem in the typical commercial power supply connected
to this instrument.
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
Complies This instrument stabilizes its own radio variability and has no effect
such as flicker in lighting apparatus.
Immunity test
IEC 60601-1-2
(2014)
test level
IEC 60601-1-2
(2007, 2001)
test level
Compliance
level
IEC 60601-1-2 (2007, 2001)
Electromagnetic
environment — Guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
Contact:

8 kV
Air:

2,

4,

8,

15 kV
Contact:

2,

4,

6 kV
Air:

2,

4,

8 kV
Same as left Floors should be made of wood,
concrete, or ceramic tile that
hardly produces static. If floors
are covered with synthetic
material that tends to produce
static, the relative humidity
should be at least 30%.