Olympus oep-4, Instructions Manual

Page: 51 / 80

S
yst
e
m
S
e
tu
p
5
5.9 Setup of the OUTPUT SETUP Menu
51
5.9
Setup of the
OUTPUT SETUP
Menu
This menu is used to set up the output signal of this
instrument.
To display the OUTPUT SETUP menu
1
Press the MENU button to initiate the menu
display.
2
Press “
b
” or “
B
” to display the OUTPUT SETUP
menu, which can be identified with characters
“OUTPUT SETUP” on the top left of the screen
(See Figure 5.9).
Figure 5.9
Setting “DISPLAY”
This item is used to set whether setting values of this
instrument (print quantity, memory page, operation
mode and source/memory) are displayed on the monitor.
“DISPLAY” can also be set by pressing the DISPLAY
button on the front panel (see on page 29). Changing the
setup of one of these buttons or items affects the setups
of all of them.
1
Press “ v ” or “ V ” to move the cursor on
“DISPLAY.”
Characters “DISPLAY” are displayed in green
when the cursor is positioned on this item.
2
Press “ b ” or “ B ” to select either “ON” or “OFF.”
The selected setting is displayed in green on the
monitor.
Setting “RBN REMAIN”
This item is used to set whether the remaining ink ribbon
information is displayed on the monitor.
1
Press “
v
” or “
V
” to move the cursor on “RBN
REMAIN.”
Characters “RBN REMAIN” are displayed in green
when the cursor is positioned on this item.
2
Press “
b
” or “
B
” to select either “ON” or “OFF.”
The selected setting is displayed in green on the
monitor.
Setting “SOURCE”
This item is used to set whether the color tones in the
video signal output from this instrument to the monitor
are corrected.
1
Press “
v
” or “
V
” to move the cursor on
“SOURCE.”
Characters “SOURCE” are displayed in green
when the cursor is positioned on this item.
2
Press “
b
” or “
B
” to select either “EE” or “THRU.”
The selected setting is displayed in green on the
monitor. Usually select “EE.”
Setting “OUTPUT SYNC”
This item is used to select the sync signal for the video
signal output from this instrument to the monitor.
1
Press “
v
” or “
V
” to move the cursor on “OUTPUT
SYNC.”
Characters “OUTPUT SYNC” are displayed in
green when the cursor is positioned on this item.
2
Press “
b
” or “
B
” to select either “EXT&G-ON” or
“EXT.”
The selected setting is displayed in green on the
monitor. Usually select “EXT.”
OFF : Setting values are not displayed.
ON :
Setting values are displayed.
OFF : Remaining ink ribbon information is not
displayed.
ON : Remaining ink ribbon information is
displayed.
THRU : Without correcting the color tones.
EE : With correcting the color tones.
EXT : The sync-on-green type video signals
EXT&G-ON : The sync-on-green type and sync
separation type video signals