DMTA-10040-01EN, Rev. E, February 2018
Chapter 3
66
An external display can be used if the
VGA OUTPUT
is set to
ON
, which enables the
VGA output connector on the back of the NORTEC 600 instrument. By default, this
setting is
OFF
.
c)
Set
AUTO ERASE
to
ON
or
OFF
(see “Adjusting Auto Erase” on page 67 for
details).
d)
Set
APPLICATION WINDOW AT STARTUP
to
ON
or
OFF
(see “Selecting
the Startup Screen” on page 67 for details).
e)
Set
CROSSHAIRS
to
ON
or
OFF
.
If
ON
is selected, a cross mark, centered on the null position, or point, is
displayed. This is useful for monitoring signal drift from the null point.
4.
Press
to return to the previous screen.
3.5
Changing the Display Brightness
You can adjust the NORTEC 600 display brightness by changing the backlight
intensity. The display brightness can be set at 0 %, 25 %, 50 %, 75 %, and 100 %.
Choosing a high percentage increases the brightness of the display. By default, the
display brightness is set to 100 %. The NORTEC 600 uses a transflective color display
that reflects ambient light and becomes brighter in direct light. With brighter ambient
conditions, you can set the display
BRIGHTNESS
to a lower percentage.
To change the display brightness
1.
Press the ADV SETUP menu key (
) twice, then press the B key to enter the
SYSTEM SETUP
screen.
2.
Repeatedly press the FULL NEXT key (
) until
BRIGHTNESS
is highlighted.
3.
Using the knob, select the desired
BRIGHTNESS
percentage:
0 %
,
25 %
,
50 %
,
75 %
, or
100 %
.
4.
Press
to return to the main inspection screen.
NOTE
Summary of Contents for nortec 600
