DMTA-10040-01EN, Rev. E, February 2018
Software User Interface
59
Figure 2
‑
11 Example of VMAX
2.4.1
Enabling Real-Time Readings on the Main Inspection Screen
The real-time readings are enabled through the ADV SETUP menu key (
).
To enable the real-time readings bar on the main inspection screen
1.
Press the ADV SETUP menu key (
).
2.
Press the B key.
3.
Press the E key.
4.
Press the B key.
5.
Press the FULL NEXT key (
) to navigate to the desired type and/or location.
Only
TOP LEFT
and
TOP RIGHT
are valid locations for the real-time readings on the
main inspection screen. For available locations in full screen, see “Enabling the Real-
Time Readings in Full-Screen Mode — FULL NEXT key” on page 60.
6.
Rotate the knob to make a selection.
7.
Press the FULL NEXT key (
) to navigate to another type and/or location.
Volts Max Vert.
(+ or
−
)
NOTE
Summary of Contents for nortec 600
