Olympus MAJ-2308, Instructions Manual, Page: 92 / 120

88
6.3 Operation of IR playback function
MAJ-2308 INSTRUCTION MANUAL
Ch.6
NOTE
The sub-screen disappears even when switching to another imaging mode.
NOTE
IR playback can be controlled equally from any of scope switches 1 to 3, foot
switches 1 to 6, and custom buttons 1 and 2 on the touch panel. For how to assign
the custom switch for use in the control, follow the instructions given in “
 Setting
the custom switch” on page 30.
4
Observe the WLI image (still image) displayed
on the sub-screen of the observation monitor.
Figure 6.7
NOTE
• For the WLI image (still image), the image about 4 seconds before the filter
selector knob operation is displayed. Therefore, if you switch to IR imaging mode
again immediately after switching from IR imaging mode to WLI mode, the WLI
image (still image) may not be displayed.
• Change the display position and size of the sub-screen by setting the video
recorder and observation monitor. Set according to instruction manual of video
recorder and observation monitor.
5
When the observation of WLI image (still
image) is completed, tap the “Pull-down” button
for “IR playback” to select “Stop” and delete the
sub-screen.
Figure 6.8
WLI image (still image)
Sub-screen
Stop Pull-down