Olympus MAJ-2308, Instructions Manual, Page: 28 / 120

24
3.3 Connection of Infrared Imaging Unit (MAJ-2304)/ Blue Light Imaging Unit (MAJ-2305)
MAJ-2308 INSTRUCTION MANUAL
Ch.3
CAUTION
• Be sure to attach the unit cover after connecting the imaging unit to the LED light
source. Otherwise, the imaging unit may be disconnected and equipment
malfunction may result.
• If the provided Allen screwdriver (3 mm width across flats) is twisted during
tightening of the lock screws (× 2), do not apply force any more. Otherwise, the
equipment and/or the provided Allen screwdriver may be damaged.
NOTE
Make sure not to lose the provided Allen screwdriver (3 mm width across flats). It
will be required when detaching the imaging unit from the LED light source for
servicing, etc.
CAUTION
• When connecting an imaging unit to the LED light source, be sure to connect to the
unit terminal marked with the same name as the name marked on the imaging unit.
If an imaging unit is connected to a unit terminal with a different marking,
equipment malfunction will result.
• Do not apply an excessive force to the unit terminal of the LED light source and the
connector on this instrument. Otherwise, equipment damage may result.
6
Tighten the lock screws (× 2) using the provided Allen screwdriver (3 mm width across
flats) and attach the unit cover to the LED light source.
Figure 3.11
Unit cover
LED light source
Allen screwdriver
(3 mm width
across flats)