Olympus MAJ-2308 Instructions Manual Download Page 89 | Manualshive

Page: 89 / 120

Olympus MAJ-2308 Instructions Manual Download Page 89

6.2 Operation of IR imaging mode

85

MAJ-2308 INSTRUCTION MANUAL

Ch.6

NOTE

• The illumination light is extinguished temporarily during the observation mode

switching.

• If the spare lamp selector lever of the LED light source is set to “SPARE LAMP”, IR

imaging is not available.

• Some switches and buttons cannot be operated for a few seconds in which the

observation mode is switched over.

• The image is monochrome during IR imaging.

• The image may sometimes be noisy during IR imaging mode.

• The contrast cannot be changed during IR imaging mode.

• For more details on the IR imaging, contact Olympus.

1

By referring to the instruction manuals for the LED light source and surgical
microscope used in combination with this instrument, set the power switch of the LED
light source to “ (ON)” and then turn ON the surgical microscope.

2

Turn on the observation monitor and video recorder used in combination with this
instrument by following the instructions in their instruction manuals.

3

To perform IR imaging, set the filter selector
knob to “IR”.

Figure 6.1

4

The IR icon appears on the observation
monitor to indicate the IR

imaging

mode. Now

IR

imaging

can be started.

Figure 6.2

Filter selector knob

«
...
87
88
89
90
91
...
»

Summary of Contents for MAJ-2308

























































































































Reviews:

No comments