134
Chapter 8 Storage and maintenance
For 8.5-mm type
Repack the equipment in the order of: Main unit and control unit
→
Insertion tube.
Stow accessories as illustrated below. (For 8.5-mm type)
Main unit and control unit
Stow the main unit with the control unit
being mounted on its back.
Position the main unit and the universal
cable as shown in the diagram.
Universal cable
Inner wall of the storage compartment
Insertion
tube
Shoulder
strap
Wind the insertion tube in a loop alongside of
the inner wall of the storage compartment and
stow the shoulder strap.
Check if the control unit is mounted on the
main unit, and then close the lid.
Battery charger (optional)
Measurement calibrator
(Optional/included in
measurement adapter set)
Store the following in the
mesh bag
USB flash drive for
recording images
Lens cleaning kit
AC adapter (2 pcs)
•
For main unit
•
For battery
charger (optional)
AC power cord
Optical adapter case holder
INSTRUCTIONS
Utility disc
Batteries (2 pcs/optional)
Optical adapter case
Centering device
(optional)
Storage instruction label
Summary of Contents for IPLEX LX Series
Page 2: ......
Page 8: ...vi For 8 5 mm type insertion tube 157 Appendix 158 System chart 158...
Page 10: ...2 3 Warning plate...
