110
Chapter 6 Measurement procedures (LX only)
5
Check that the stereo optical adapter is securely attached, select
“OK”, and then press the [MEAS/ENTER] joystick.
See “Attaching the stereo optical adapter” (page 104) for the attachment
procedure.
CAUTION
•
If the stereo optical adapter is not installed properly, it will not be possible to get correct
measurement results.
6
Adjust the brightness of a white image.
Use the check tool provided with the stereo measurement set to capture a white
image.
The orientation of the insertion tube in the white indented part is different
depending on whether the optical adapter is a direct view type or side view type.
•
For forward-view optical adapter
Insert the distal end of the insertion tube into the forward-view guide directly
oriented towards the protrusion in the white indented part.
Check tool
White indented part
Protrusion
Forward-view
guide hole
Insertion tube
Forward-view optical adapter
Summary of Contents for IPLEX LX Series
Page 2: ......
Page 8: ...vi For 8 5 mm type insertion tube 157 Appendix 158 System chart 158...
Page 10: ...2 3 Warning plate...
