Olympus IPLEX LX Series Instructions Manual Download Page 146

Page: 146 / 168

138

Chapter 9 Troubleshooting

9.1

Troubleshooting guide

Error messages

Problem

Display

Possible cause

Remedy

Image cannot
be recorded
or retrieved.

NO RECORDING
MEDIA.

The USB Flash Drive is
not inserted.

Insert a USB Flash Drive to
use and restart operation.

RECORDING MEDIA
FULL.

The USB Flash Drive is
full.

Delete unneeded data to
free up space or replace with
new USB Flash Drive.

THIS IMAGE
CANNOT BE
RETRIEVED.

The image has not
been recorded with the
IPLEX LX/LT.

Only images recorded with
the IPLEX LX/LT can be
retrieved.

RECORDING MEDIA
ERROR.
PLEASE FORMAT
THE RECORDING
MEDIA.

The format of the USB
Flash Drive is not
recognized.

Format the USB Flash Drive
with the IPLEX LX/LT.

IMAGER ERROR.
PLEASE TURN OFF
THE POWER.

The self-check function
is activated and
prompts termination of
operation.

Stop inspection and turn the
instrument off, then on
again.

An error
message
appears
when a USB
Flash Drive is
connected.

OVER CURRENT
(USB).
PLEASE TURN OFF
THE POWER.

The USB Flash Drive
being used is not
recommended for this
system.

Stop inspection and turn the
instrument off, then on
again.
Use a recommended USB
Flash Drive.

A USB device other
than a USB Flash Drive
is connected.

Disconnect all USB devices
except the USB Flash Drive.

The optical
adapter is
attached
improperly.

UNKNOWN OPTICAL
ADAPTER.

The optical adapter
type cannot be
recognized.

Stop inspection and re-
attach the optical adapter.
((See “3.6 Inspecting the
optical adapter” (page 35).)

OPTICAL ADAPTER
HAS BEEN
DETACHED.

The optical adapter has
detached.

Summary of Contents for IPLEX LX Series









































































































































































Search results

Summary of Contents for IPLEX LX Series

Reviews:

Related manuals for IPLEX LX Series

Brands by name

Popular brands

Olympus IPLEX LX Series, Instructions Manual

Search results

Summary of Contents for IPLEX LX Series

Reviews:

Related manuals for IPLEX LX Series

Brands by name

Popular brands