manualshive.com logo in svg

Olympus IPLEX FX IV8000-2, Instructions Manual, Page: 37 / 208

Share
Download
Olympus IPLEX FX IV8000-2 Instructions Manual Download Page 37

29

Chapter 3 Preparation and inspection before observation

„

Taking the instrument out of the case

Remove the equipment in the order of: Insertion tube 

→

 Control unit 

→

 

Base unit. 

WARNING

•

Never use the base unit while it is accommodated inside the case. If the top cover of the case 
is left open, it may close unexpectedly and pinch your hand or a cable.

CAUTION

•

Place the case on a level surface so it is stable.

•

When opening or closing the top cover of the case, always make sure that the extendable 
handle is in the stored (non-extended) position.

•

To open the top cover of the case, release the latch on the front of the case.

•

Do not pull the insertion tube with excessive force when taking it out of the storage bag.

•

Hold the drum while pulling the insertion tube out.

Storage bag

Control unit

Insertion tube

Handle

Base unit

Take the insertion tube, which is 
on the drum, out of its storage bag.

Remove the control unit.

Remove the Insertion tube 
from the drum.

Attach the soft handle and lift 
the base unit to remove it.

Storage bag

Base unit

Drum

Summary of Contents for IPLEX FX IV8000-2

















































































































































































































Reviews:

No comments