manualshive.com logo in svg

Olympus IPLEX FX IV8000-2, Instructions Manual, Page: 140 / 208

Share
Download
Olympus IPLEX FX IV8000-2 Instructions Manual Download Page 140

132

Chapter 6 Measurement procedures

„

Stereo optical adapter selection

1

The stereo optical adapter list shown below is displayed when the 
live screen is displayed if a stereo optical adapter is attached.

This list shows all the set numbers and adapter names of the stereo optical 
adapters registered that are the same type as the stereo optical adapter that is 
connected. The line selected in the list is the stereo optical adapter that was 
used the last time that measurements were made.

2

Select the optical adapter to be used from this list and press the 
[MEAS/ENTER] joystick.

•

If a stereo optical adapter that is the same type as the stereo optical adapter 
that is connected has not been registered, you need to register the stereo 
optical adapter by executing “NEW STEREO ADAPTER”. See “Using a new 
stereo optical adapter (NEW STEREO ADAPTER)” (page 134) for details 
about operations.

•

Select “CANCEL” and press the [MEAS/ENTER] joystick to end the stereo 
optical adapter settings and return to the live screen. The stereo optical 
adapter list is displayed until the stereo optical adapter is removed.

Summary of Contents for IPLEX FX IV8000-2

















































































































































































































Reviews:

No comments