Olympus IPLEX FX IV8000-2 Instructions Manual Download Page 186

Page: 186 / 208

178

Chapter 9 Troubleshooting

Messages displayed during stereo measurement

ERROR#

Description

501

Optical data is not recorded.

502

Optical data is destroyed. Contact Olympus.

503

The optical data version is different. Contact Olympus.

504

The outer diameter of the optical adapter is different. It cannot be used.

505

A system error occurred. Contact Olympus.

506

The white image is not optimal. Freeze images again.

507

A system error occurred. Contact Olympus.

601

There is erroneous data, delete the data.

701

Measurement is not possible with zoomed-in images. Freeze images again.

703

Measurement is not possible with digitally processed images.

704

Measurement is not possible with captured images.

705

Measurement is not possible with field images.

706

Measurement is impossible because the optical adapter type is not compatible with
the current environment.

707

Measurement is impossible because the images were recorded with another system.

708

Measurement is impossible because the optical adapter installation angle differs from
the registered environment data.

709

Measurement is impossible because the data in the measuring environment used in
freezing the images is not available.

710

Measurement of color bars is impossible.

711

Measurement is impossible because the images were recorded using a different
insertion tube.

801

Unfreeze the images.

Summary of Contents for IPLEX FX IV8000-2

















































































































































































































Search results

Summary of Contents for IPLEX FX IV8000-2

Reviews:

Olympus IPLEX FX IV8000-2, Instructions Manual, Page: 186 / 208

Search results

Summary of Contents for IPLEX FX IV8000-2

Reviews: