15
Recording Settings
While the recorder is designed to record
messages without requiring special settings, it
offers a LP mode for long recordings, a DICT mode
for dictation, and a Variable Control Voice Actuator
(VCVA) to economize on memory usage. For more
details see the relevant sections of the manual.
Recording modes:
SP (Standard Playback) mode/
LP (Long Playback) mode
→
P.25
Microphone sensitivity:
CONF (conference recording)/
DICT (dictation recording)
→
P.26
Variable Control Voice Actuator (VCVA):
OFF/ON
→
P.27
Notes
• When “FULL” appears on the display, you cannot
record any more. To free up memory, you have to
erase messages. (see page 21). To archive your
recordings prior to erasing, you can transfer
messages to a PC. (see software section).
• While recording is in progress, never disconnect
or connect the AC adapter even if the recorder
contains batteries. This may result in failure to play
the recorded message.
• If the recorder is paused for 30 minutes or longer
while recording, it enters standby mode and the
display shuts off. (To release the recorder from
standby mode and turn on the display, press any
one of the STOP, REC, PLAY, FF, or REW buttons
or the MENU/VOL switch.)
• See recording tips
– for Record Meetings and Lectures. (P. 26)
Overwrite recording
You can overwrite a recorded message from
any point by pressing the REC button while
the recorder is stopped or paused.
Notes
• The previous recording will be erased.
• If the overwritten recording exceeds the recorded
time of the previously recorded message, the next
message is not erased.
Recording
Summary of Contents for DS320 - Digital Voice Recorder
Page 4: ...4 Hardware Section ...
Page 36: ...36 Software Section ...
