13
Setting an ID
Setting an ID
If an ID is set, it is automatically included in each message to help identify who recorded the
message when it is transferred to a PC. Setting IDs is recommended for easier management of
recorded messages. To set an ID, stop the recorder and follow these steps:
1
Press the MENU/VOL switch.
The menu appears on the display.
2
Move the MENU/VOL switch up
to choose the “ID AAAA”
screen.
3
Press the MENU/VOL switch.
The cursor flashes at the first
character position.
4
Move the MENU/VOL switch up or
down to choose the first
character.
Characters are selectable from A to Z
and 0 through 9.
5
Press the MENU/VOL switch.
Accepts the character and moves to the next position.
Repeat the steps above to set a four-character ID.
6
Press the STOP button.
This completes the ID setup procedure.
................................................................................................
Note
If you leave the recorder idle for 3 minutes or longer during a setup
operation, any settings entered to that point will be canceled.
6
2,4
1,3,5
SP DICT
INDEX/
FOLDER
REC
STOP
ERASE
MENU
/VOL
Summary of Contents for DS320 - Digital Voice Recorder
Page 4: ...4 Hardware Section ...
Page 36: ...36 Software Section ...
