32
7
Assembly
7-1 Assembly diagram
The following diagram shows the units before assembly. The chapters describing the procedure to attach each unit
are shown in frames with dotted lines.
Before assembly, remove dust and dirt from the attaching portions of each unit and assemble carefully
so as not to scratch units.
For assembly, use the Allen wrench
provided with the microscope.
For the units marked with *, refer to the separate set of the instruction manuals.
NOTE
TIP
Condenser portion
Slider for phase
contrast
observation slider
Stage center
plate
Objective
Filter for transmitted light
illumination
Filter holder for transmitted
light illumination
Optical element (ring)
Fluorescence mirror
unit
Filter slider for reflected
light illumination
Mercury burner
Mercury lamp
housing
U-LH100HG
Umbra shield
(ambient light
shielding plate)
Fluorescence
illuminator
CKX3-RFA
Mercury burner power
supply unit* U-RFL-T
Light guide illumination system*
U-HGLGPS, U-LLG150/300,
U-LLGAD
Chapter "7-3 "(page 34)
Chapter "7-8 "(page 41)
Chapter "7-4 "(page 38)
Chapter "7-6 "(page 40)
Chapter "7-5 "(page 39)
Chapter "7-2 "(page 33)
Microscope
frame
CKX53SF
AC adapter
Mechanical stage
CKX3-MVR
Stage extension plate
CK2-SS
Dark filter
Camera
Camera adapter
Chapter "7-7 "(page 41)
Chapter "7-9 "(page 45)
