45
CKX53
4
Adjusting parfocality of the camera adapter
Adjust the parfocality of the camera adapter and the eyepiece to match the focusing of the image observed through
the eyepieces with that of the image through the camera.
For the parfocality adjustment method, refer to the instruction manual for the camera adapter in use.
1
TIP
7-9 Attaching the camera
1
Attaching the camera adapter
Refer to the instruction manual for the camera adapter in use.
TIP
2
Attaching the camera
3
Wiring the camera cable
Remove the fixing knob attached to each stage and put the fixing knob
through the hole of the cable holder. Then, attach clamping knobs to
each stage again and attach each stage to the plain stage.
For procedures to attach the stage to the plain stage, see
page 38.
TIP
When using the mechanical stage CKX3-MVR / Sub stage CK2-SS
The cable wiring needs the clamping screw (2 pcs.) a provided with the
microscope frame CKX53SF and the cable holder (2 pcs.) b
Put the clamping screw a through the hole of the cable holder b
and secure it at the screw hole of the plain stage using the Allen
wrench.
Secure the clamping screw so that the cable holder b is
hidden below the plain stage.
Place the camera cable between the cable holder b .
1
TIP
2
Refer to the instruction manual for the camera adapter in use.
TIP
b
a
