36
Insert the screws a which secured the dust cover into the holes (2
positions) g of the frame side part, and tighten them with the Allen
wrench to secure to the microscope frame.
8
Detach the the filter slider for reflected light illumination from the
light source side part e . For procedures to detach it, see page 37.
Attach the column portion i of support pillar for fluorescence
illuminator by screwing into the screw hole h of the light source
side part.
Insert the Allen wrench into the hole k of the column portion i ,
and tighten column portion i to secure to the light source side part.
Screw the adjuster portion l of support pillar for fluorescence
illuminator into the screw hole of the column portion i until the
screw becomes slightly visible.
9
10
11
12
After the light source side part e is inserted under the stage from the
back of the microscope frame, insert the pins m of the light source
side part to the groove of the frame side part d .
13
Tighten the setting screws (2 positions) c of the illuminator using
the Allen wrench, and combine the frame side part d with the light
source side part e .
14
Rotate the adjuster portion l so that the bottom surface of the adjuster
portion contacts the desk top surface.
Attach the filter slider for reflected light illumination to the light source
side part e . For procedures to attach it, see page 37.
15
16
e
d
c
d
m
e
g
a
h
l
k
i
e