5
CKX53
Units of this product
For units attachable to this product, see page 7.
·
Do not use a light source other than those recommended by Olympus.
·
The product in combination with other separately available camera may become unstable. Take the
measures to prevent the product from tipping over.
·
The use of the product in combination with other separately available items not only creates the risk of
abnormal operation, but it also may damage the product.
Installation of this product
For conditions of operating environments of this product, see page 31.
·
When moving this microscope, follow the cautions described on page 10.
·
Do not use this product in areas where it may be subjected to direct sunlight, high temperature and/or
humidity, dust or vibrations.
·
Secure the space of 10cm or more around the power supply unit to release the heat.
Handling of this product
·
This product is a precision instrument. Handle it with care and avoid subjecting it to a sudden or severe
impact.
·
The stopper attached to this product may be damaged if excessive force is applied.
·
Never disassemble any part of the product. Otherwise, failure could be caused.
NOTE
NOTE
NOTE
Handling Precautions
Maintenance and Storage
Maintenance
1. Do not leave stains or fingerprints on the lenses or filters. If they get dirty, blow away dust with a commercially
available blower and gently wipe the lens or filter with a piece of cleaning paper (or clean gauze).
Only when cleaning fingerprints and oil stains, slightly moisten a piece of cleaning paper with commercially
available absolute alcohol and wipe them off with it.
Since the absolute alcohol is highly flammable, it must be handled carefully. Be sure to keep it away
from open flames or potential sources of electrical sparks. For example, the electrical equipment that
is switched on and off may cause the ignition of a fire. Also, always use absolute alcohol only in a
well-ventilated room.
2. Wipe the portions other than lens with a dry soft cloth. If the dirt cannot be removed by dry-wiping, moisten a soft
cloth with diluted neutral detergent and wipe the dirty surface with it.
Do not use organic solvents other than alcohol because they may deteriorate the coated surface or
plastic parts.
CAUTION
NOTE
