10
3
Observation procedures
1
Moving the microscope
3-1 Preparation of observation
When carrying this microscope to a different location, remove all cables
and units in advance.
When using the Fluorescence set, remove the mercury lamp housing
U-LH100HG or the liquid light guide adapter U-LLGAD from the
fluorescence illuminator CKX3-RFA.
Hold the lower area a of the binocular portion and the hand grip
b at the bottom of the column or hold the column and install this
microscope at the predefined location.
・Do not hold the stage or the focusing knob. The micro-
scope may be damaged.
・Do not carry the microscope leaving the specimen on the
stage.
Useful information
When using the Bright field set or the Phase contrast entry
set and Phase contrast standard set, you can move the
microscope by raising the base portion (front) a and sliding
the back side c of the microscope frame CKX53S.
1
2
3
NOTE
TIP
2
Attaching AC adapter and power cord
・Cables and cords are vulnerable when bent or twisted. Nev-
er subject them to excessive force.
・When using the Fluorescence set, the power cord for illu-
mination must be attached. For details, see the instruction
manual provided with the power supply unit for mercury
burner U-RFL-T or the light guide illumination system U-
HGLGPS.
NOTE
Insert the connector portion a of the AC adapter to the connector
b of the microscope frame CKX53SF.
Insert the connector portion c of the power cord to the connector
d of the AC adapter.
Connect the power cord's plug to the power outlet.
・Connect the ground terminal of the power cord and that of
the power outlet.
1
2
3
NOTE
a
c
a
b
d
c
b
a