Olympus C-2020ZOOM - CAMEDIA - Digital Camera Instructions Manual Download Page 47

Page: 47 / 204

FOCUS LOCK

If your main subject is not within the autofocus marks, follow the
procedure below to obtain focus. This is called focus lock.

Position  your  subject  within
the  autofocus  marks,  and
press  the  Shutter  release
button halfway.

• The Green lamp next to the

viewfinder lights.

Recompose the picture while
keeping the Shutter release
button pressed halfway.

Press the Shutter release
button fully to take the
picture.

Autofocus mark

Viewfinder

Note:

• If the Green lamp blinks, the focus or exposure is not locked. Check the

working distance. (p. 50)

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera













































































































































































































Search results

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera

Reviews:

Related manuals for C-2020ZOOM - CAMEDIA - Digital Camera

Brands by name

Popular brands

Olympus C-2020ZOOM - CAMEDIA - Digital Camera, Instructions Manual

Search results

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera

Reviews:

Related manuals for C-2020ZOOM - CAMEDIA - Digital Camera

Brands by name

Popular brands