Olympus C-2020ZOOM - CAMEDIA - Digital Camera Instructions Manual Download Page 62

Page: 62 / 204

MACRO MODE

You can get as close as 8" to your subject. An approx. 2.4" x 3" subject
can be photographed fully within the frame.

Set the Mode dial to P or A/S/M.

Press the Spot/Macro button
several times until
appears on the control panel.

• To cancel the Macro mode,

press the Spot/Macro button
several times until
disappears.

Take a picture.

Shooting Range: Approx. 8" ~ 31"

A/S

Control panel

Note:

• When using the flash in the Macro mode, the flash may not have the

proper effect. Confirm the result using the LCD monitor.

• Using the LCD monitor as a viewfinder makes it easy to take close-up

pictures.

• Unless OFF is selected in All Reset, the setting will be canceled when

the power is turned off. (p. 172)

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera













































































































































































































Search results

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera

Reviews:

Related manuals for C-2020ZOOM - CAMEDIA - Digital Camera

Brands by name

Popular brands

Olympus C-2020ZOOM - CAMEDIA - Digital Camera, Instructions Manual

Search results

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera

Reviews:

Related manuals for C-2020ZOOM - CAMEDIA - Digital Camera

Brands by name

Popular brands