Olympus C-2020ZOOM - CAMEDIA - Digital Camera Instructions Manual Download Page 29

Page: 29 / 204

Note:

•

Use 3V (3.3V) cards only.

5V cards cannot be used.

• Olympus brand cards are recommended (already formatted). Non-

Olympus brand cards must be formatted by the camera.

• When using a special function SmartMedia card (optional), insert it in the

same way.

Caution:

• NEVER open the card cover, eject the card, remove the batteries, or

pull the plug while the camera is in operation. It may destroy the data
in the card.

• The card is a precision instrument. Handle it carefully and do not

subject it to physical shocks.

• Do not touch the contact area of the card.

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera













































































































































































































Search results

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera

Reviews:

Related manuals for C-2020ZOOM - CAMEDIA - Digital Camera

Brands by name

Popular brands

Olympus C-2020ZOOM - CAMEDIA - Digital Camera, Instructions Manual

Search results

Summary of Contents for C-2020ZOOM - CAMEDIA - Digital Camera

Reviews:

Related manuals for C-2020ZOOM - CAMEDIA - Digital Camera

Brands by name

Popular brands