Olympus 262032 Page 78 Basic Manual Download

Page: 78 / 156

Flash shooting

In addition to the camera’s built-in flash capabilities, you can use any of the external flash

units specified for use with this camera. This enables you to take advantage of a wider variety

of flash shooting techniques to suit different shooting conditions.

The external flashes communicate with the camera, allowing you to control the camera’s

flash modes with various available flash control modes, such as TTL-AUTO and Super FP

flash. An external flash unit specified for use with this camera can be mounted on the camera

by attaching it to the camera’s hot shoe. You can also attach the flash to the flash bracket on

the camera using the bracket cable (optional).

Refer to the external flash’s manual as well.

Functions available with external flash units

* The focal length of the lens that can be used (Calculated based on 35 mm film camera)

Notes

• The FL-40 optional flash cannot be used.

Using the external electronic flash

Be sure to attach the flash to the camera before turning on the flash’s power.

Remove the hot shoe cover by sliding it
in the direction indicated by the arrow in
the illustration.

• Keep the shoe cover in a safe place to avoid

losing it. You can attach the shoe cover to the

back of the eyepiece cover, which is attached

to the strap. Put the shoe cover back on the

camera after removing the external flash.

Attach the electronic flash to the hot
shoe on the camera.

• If the lock pin is protruding, turn the shoe lock

ring as far as it will go in the direction opposite

to LOCK. This will pull the lock pin back

inside.

Turn on the flash.

• When the charge lamp on the flash lights up, charging

is complete.

• The flash will be synchronized with the camera at a

speed of 1/250 sec. or less.

Select a flash mode.

Select the flash control mode.

• TTL-AUTO is recommended for normal use.

Press the shutter button halfway.

• Shooting information such as ISO sensitivity, aperture

value, and shutter speed is communicated between

the camera and flash.

Press the shutter button all the way.

External flash shooting

Optional flash

FL-50R

FL-50

FL-36R

FL-36

FL-20

RF-11

TF-22

Flash control mode

TTL-AUTO, AUTO, MANUAL,

FP TTL AUTO, FP MANUAL

TTL-AUTO,

AUTO, MANUAL

TTL-AUTO,

MANUAL

GN (Guide number)
(ISO100)

GN50 (85 mm

)

GN28 (24 mm

)

GN36 (85 mm

)

GN20 (24 mm

)

GN20 (35 mm

)

GN11

GN22

RC mode

Hot shoe cover

Lock pin

Lock ring

s0017_e_00_0_unified.book Page 78 Thursday, October 30, 2008 2:47 PM

Summary of Contents for 262032





























































































































































Search results

Summary of Contents for 262032

Reviews:

Related manuals for 262032

Brands by name

Popular brands

Olympus 262032, Basic Manual

Search results

Summary of Contents for 262032

Reviews:

Related manuals for 262032

Brands by name

Popular brands