Olympus 262032 Page 113 Basic Manual Download

Page: 113 / 156

113

Printing

Connecting the camera to a printer

Use the provided USB cable to connect the camera to a PictBridge-compatible printer.

Turn the printer on and connect the camera’s multi-connector to the printer’s USB
port with the USB cable.

• For details on how to turn the printer on and the position of the USB port, refer to the printer’s

manual.

Turn on the camera.

• The selection screen for the USB connection is displayed.

Use

to select [EASY PRINT] or [CUSTOM

PRINT].

If you select [EASY PRINT]

• Go to “Easy printing” (

P. 113)

If you select [CUSTOM PRINT]

•

[ONE MOMENT]

is displayed and the camera and

printer are connected.
Go to “Custom printing” (

P. 114)

Notes

• If the screen is not displayed after a few minutes, disconnect the USB Cable and start again

from Step 1.

Easy printing

Use

to display the pictures you want to print on the camera.

• Display the image you want to print on the camera and

connect the camera with a printer using a USB cable.
The screen on the right appears shortly.

Press the

(print) button.

• The picture selection screen appears when printing is

completed. To print another picture, use

to select

the image and press the

button.

• To exit, unplug the USB cable from the camera while the

picture selection screen is displayed.

Multi-connector

USB cable

STORAGE

MTP

CONTROL

EASY PRINT

CUSTOM PRINT

USB

SET

PC / CUSTOM PRINT

EASY PRINT START

s0017_e_00_0_unified.book Page 113 Thursday, October 30, 2008 2:47 PM

Summary of Contents for 262032





























































































































































Search results

Summary of Contents for 262032

Reviews:

Related manuals for 262032

Brands by name

Popular brands

Olympus 262032, Basic Manual

Search results

Summary of Contents for 262032

Reviews:

Related manuals for 262032

Brands by name

Popular brands