background image

46

EN

2

Exposur

e

There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted 
averaging metering, and 3 types of spot metering. Select the most suitable mode for the 
shooting conditions.

Setting display

G

 Digital ESP metering

The camera measures the light levels and calculates the light level differences in 49 separate areas 
of the image. This mode is recommended for general use. Setting the AF synchronized function to 

[ESP+AF]

 enables metering centered around the AF target that is in focus with AF.

H

 Center weighted averaging metering

This metering mode provides the average metering between the 
subject and the background lighting, placing more weight on the 
subject at the center. Use this mode when you do not want the light 
level of the background to affect the exposure value.

I

 Spot metering

The camera meters a very small area around the center of the subject, 
defined by the spot metering area mark in the viewfinder. Use this 
mode when there is very strong backlight.

IJ

 Spot metering - highlight control

When the overall background is bright, white areas of the image will 
come out gray if you use the camera’s automatic exposure. Using this 
mode enables the camera to shift to over-exposure, allowing accurate 
white reproduction.
Metering area is the same as spot metering.

IK

 Spot metering - shadow control

When the overall background is dark, black areas of the image will come out gray if you use the 
camera’s automatic exposure. Using this mode enables the camera to shift to under-exposure, 
allowing accurate black reproduction. Metering area is the same as spot metering.

Changing the metering mode

Direct button

G

j

Super control panel

i

p

: [METERING]

Menu

MENU

[

X

] [METERING]

G

: Digital ESP metering

H

: Center weighted averaging metering

I

: Spot metering

IJ

: Spot metering - highlight control

IK

: Spot metering - shadow control

Viewfinder

Control panel

i

 button

G

 button

MENU

 button

j

: Metering area

s0017_e_00_0_unified.book  Page 46  Thursday, October 30, 2008  2:47 PM

Summary of Contents for 262032





























































































































































Reviews: