Olympus 262032 Page 45 Basic Manual Download

Page: 45 / 156

Exposur

The picture looks blurred:

The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.

When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera
shake by using the image stabilizer.

“Image stabilizer” (P. 62)

To change the exposure adjustment interval:

This can be set in 1/3 EV, 1/2 EV or 1 EV increments.

“EV STEP” (P. 100)

To switch the operations of the main dial and sub dial:

You can switch the functions that are set with the main dial and sub dial.

“DIAL FUNCTION” (P. 94)

Notes

• Exposure compensation is not available in

mode.

Bulb shooting

You can take a picture with a bulb exposure time in which the shutter stays open as long as
you hold down the shutter button.
Bulb shooting can also be done using an optional remote control (RM-1).

“Bulb shooting

with the remote control” (P. 62)

mode, set the shutter speed to [BULB].

• “buLb” is displayed in the viewfinder and on the control

panel.

To automatically end bulb shooting after a specified period of time:

You can set the maximum time for bulb shooting.

“BULB TIMER” (P. 100)

To fix the focus during manual focus shooting:

You can fix the focus so the focus does not change even if the focus ring is turned during
exposure.

“BULB FOCUSING” (P. 94)

Notes

• The following functions are not available during bulb shooting.

Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing

The viewfinder shows the focused area (depth of field) with the selected aperture value.

Press the preview button to use the preview function.

• When

[

;

FUNCTION]

is assigned to

[PREVIEW]

[LIVE PREVIEW]

, you can also press the

button to

preview the picture.

“

;

FUNCTION” (P. 96)

TIPS

Preview function

Preview button

s0017_e_00_0_unified.book Page 45 Thursday, October 30, 2008 2:47 PM

Summary of Contents for 262032





























































































































































Search results

Summary of Contents for 262032

Reviews:

Related manuals for 262032

Brands by name

Popular brands

Olympus 262032, Basic Manual

Search results

Summary of Contents for 262032

Reviews:

Related manuals for 262032

Brands by name

Popular brands