82
EN
Playback fu
nction
s
6
6
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g
“REC VIEW” (P. 108)
1
Press the
q
button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use
p
to select images you want to view. You can
also turn the dial to switch to
U
for close-up
playback.
Single-frame/Close-up playback
q
button
INFO
button
p
<
button
j
15
15
15
[4032x3024,1/8]
[4032x3024,1/8]
2009.03.16
2009.03.16 21:56
21:56
100-0015
100-0015
15
15
L N
N
Press
p
to change the
close-up position.
Press
p
to move the display
of the close-up position.
When
[
g
FACE DETECT]
(
g
P. 38) is set to
[ON]
, a
frame is displayed around a
detected face. Press
i
to
move the frame to another
face.
Press
bd
to view frame-by-
frame close-ups.
When
[
g
FACE DETECT]
is set to
[ON]
, press
ac
to move to another face in
close-up position.
• Press the
INFO
button to
return to close-up
playback.
(Single-frame) (Close-up
playback)
Press the
INFO
button
a
: Displays the frame that is
stored 10 frames back
c
: Displays the frame that is
stored 10 frames ahead
d
: Displays the next frame
b
: Displays the previous frame
(Close-up position playback)
Press the
INFO
button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the
q
button again.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the
<
button
• Plays back the image at a
10× magnified close-up
position.
U
G
s0017_e_00_0_unified.book Page 82 Thursday, October 30, 2008 2:47 PM
