![background image](http://html.mh-extra.com/html/olympus/262032/262032_basic-manual_733782056.webp)
56
EN
3
Focusing and shooting functions
N
Dynamic-single target AF mode
If the camera cannot focus on the subject using the
selected AF target, the camera focuses using the adjacent
AF target.
• When the button is released, the currently selected AF
target lights. When
M
or
N
is set, you can select the
AF target to be used at that point. For operation, refer to
Step 2 in “Selecting the AF target position” (
g
P. 56)
in the next section.
• When
M
or
N
is set, you can turn the dial to select
the AF target.
• When
M
or
N
is set, you can select the AF target with
p
.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the
P
button and release your finger to enable selection of the AF target.
2
Use the main dial/sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac
, and use the sub dial to perform the same
operation as
bd
.
• Press the
i
button to return the position of the AF target
to the center.
Selecting the operation when the AF target is selected:
j
You can change the operation of the dials and arrow pad for selecting the AF target.
g
“
P
SET UP” (P. 94)
Selecting the position of the AF target with the arrow pad without pressing the
P
button:
j
Press the shutter button halfway and release it, then use the arrow pad to change the position of
the AF target.
g
“
n
FUNCTION” (P. 97)
x
Notes
• When
[LIVE VIEW AF MODE]
is set to
[IMAGER AF]
or
[HYBRID AF]
, you cannot use the
dynamic-single target AF mode.
Direct button
P
+
j
/
k
Super control panel
i
p
: [AF AREA]
P
+
k
Menu
MENU
[
X
] [AF AREA]
TIPS
Selected AF
target
P
button
i
button
k
MENU
button
j
s0017_e_00_0_unified.book Page 56 Thursday, October 30, 2008 2:47 PM