![background image](http://html.mh-extra.com/html/olympus/262032/262032_basic-manual_733782108.webp)
108
EN
Cust
omizing your
c
amer
a
7
VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images
in a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
REC VIEW
You can display the picture you have just taken on the monitor while it is being recorded to
the card, and to select how long the picture is displayed. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter button halfway while checking
the picture lets you resume shooting immediately.
[1SEC]
–
[20SEC]
Selects the number of seconds to display each picture. Can be set in
units of 1 second.
[OFF]
The picture being recorded to the card is not displayed.
[AUTO
q
]
Displays the image being recorded, and then switches to playback
mode. This is useful for erasing a picture after checking it.
PIXEL MAPPING
g
P. 126
FIRMWARE
Your product’s firmware version will be displayed.
When you make inquiries about your camera or accessories or when you want to download
software, you will need to state which version of each of the products you are using.
Press
d
. Your product’s firmware version will be displayed. Press the
i
button to return to
the previous screen.
In
P
,
A
,
S
, and
M
mode, current camera settings (including any changes you have made)
are retained when the power is turned off. To reset the camera to the factory default settings,
set
[RESET]
. You can register settings in advance to
[RESET1]
and
[RESET2]
. The camera
settings at that time are registered in
[RESET1]
and
[RESET2]
. For details on the registered
functions, refer to “Functions that can be registered with My Mode and Custom Reset
Setting” (
g
P. 136).
Registering [RESET1]/[RESET2]
1
Select either [RESET1]/[RESET2] to register and press
d
.
• If settings have already been registered,
[SET]
is displayed next to
[RESET1]
/
[RESET2]
.
Selecting
[SET]
again overwrites the registered setting.
• To cancel the registration, select
[RESET]
.
2
Select [SET] and press the
i
button.
NTSC
North America, Japan, Taiwan, Korea
PAL
European countries, China
Resetting the camera settings
Menu
MENU
[
W
] [CUSTOM RESET]
s0017_e_00_0_unified.book Page 108 Thursday, October 30, 2008 2:47 PM