Olympus 202192 - Ultra Zoom Accessory Instructions Manual Download Page 43

Page: 43 / 212

Press

to select YES.

●

If you want to cancel formatting,
select NO.

Press the OK button to start the
formatting process.

●

Card formatting starts when the
card-access lamp blinks.

●

The menu disappears when
formatting is complete.

YES

Confirmation screen

●

All existing data stored on the card will be erased when the card is
formatted. Make sure that you save or transfer important data before
formatting a used card.

●

Recording time may be higher with non-Olympus cards, PC-formatted
cards, and used cards. In such cases, re-formatting with the camera is
recommended.

●

Cards with a write-protect seal attached cannot be formatted.

Note:

Summary of Contents for 202192 - Ultra Zoom Accessory





















































































































































































































Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands

Olympus 202192 - Ultra Zoom Accessory, Instructions Manual

Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands