Olympus 202192 - Ultra Zoom Accessory Instructions Manual Download Page 169

Page: 169 / 212

169

●

Images taken with this camera can also be printed using a printer or at a
photo lab that supports the Design rule for Camera File system/DCF.

●

DPOF reservations set by another device cannot be changed by this
camera. Make changes using the original device.

●

If a card contains DPOF reservations set by another device, entering
reservations using this camera may overwrite the previous reservations.

●

Even if an image appears with the message “PICTURE ERROR”, print
reserve may be performed on it. In such a case, the print reserve icon (

)

does not appear on the screen where an image is displayed for full view.
Since

appears on the screen where multiple images are displayed

(index-display mode), it is possible to confirm the print reserve status.

●

This camera cannot be directly connected to printers such as the Olympus
P-300 digital printer.

●

Not all functions may be available on all printers or at all photo labs.

Note:

Summary of Contents for 202192 - Ultra Zoom Accessory





















































































































































































































Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands

Olympus 202192 - Ultra Zoom Accessory, Instructions Manual

Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands