Olympus 202192 - Ultra Zoom Accessory Instructions Manual Download Page 131

Page: 131 / 212

131

Position the AF target mark where
you like to focus, then press the
shutter button halfway down.

●

AF confirmation mark lights.

Press the shutter button all the
way down.

●

After recording, the AE lock is
released, and the AEL display dis-
appears.

●

When MEMO is displayed, the
exposure remains memorized and
is effective next time you take a
picture.

AE lock is possible even after press-
ing the shutter button halfway down.

When the AE lock is canceled

The AE lock and AE Memory are canceled,
when...

●

The Mode Dial setting is changed.

●

The power is turned off.

●

Metering mode is changed with
(Metering mode button).

●

Drive mode is changed.

●

Flash mode is changed.

●

is pressed to display the Menu

screen.

The AE Lock remains engaged even
when the camera is set to sleep mode.

AF confirmation mark

AEL

P F2.8 1/800 0.0

3, 4

●

The AE Lock is not available with the Menu screen displayed.

Note:

Summary of Contents for 202192 - Ultra Zoom Accessory





















































































































































































































Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands

Olympus 202192 - Ultra Zoom Accessory, Instructions Manual

Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands