Olympus 202192 - Ultra Zoom Accessory Instructions Manual Download Page 96

Page: 96 / 212

RECORDING—range/focus (Cont.)

Selecting the focus range (AF MODE)

You can select the focus range of your subject.
iESP

: Focus selection is based on the entire image on the screen (factory

preset).

SPOT

: Focus selection is based on the image within the AF target mark.

Press

to display Menu.

Press

on the Arrow pad to

select AF MODE, then press

Press

to select iESP or

SPOT, then press the OK button.

●

If you want to take a picture now,
you can do so.

Press the OK button.

●

The settings are stored and the
Menu disappears.

2, 3

[

3 / 5

]

F2.8 1/800 0.0

iESP

SPOT

AF MODE

FULL TIME

Menu (still picture recording mode)

Control panel

AF system

Summary of Contents for 202192 - Ultra Zoom Accessory





















































































































































































































Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Olympus 202192 - Ultra Zoom Accessory, Instructions Manual, Page: 96 / 212

Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews: