Olympus 202192 - Ultra Zoom Accessory Instructions Manual Download Page 142

Page: 142 / 212

142

DISPLAY—processing pictures (cont.)

●

Indexes cannot be created on the cards listed below.
– Protected cards
– Cards that warn you when the card has inadequate memory in the

recording mode.

Note:

Movie Editing

You can select the scenes you want and record them together as a new
movie.

Press the Arrow pad and display a
picture with

attached.

Press

●

The Menu screen appears.

Press

and select "FUNCTION",

then press

Press

and select "MOVIE

EDIT", then press the OK button.

Press the Arrow pad and select
the first index picture from the
movie. Then press the OK button.

: Go to the first movie picture.
: Go to the last movie picture.
: Advance one frame at a time
: Back one frame at a time

1, 3, 4, 5

[

1 / 1

]

MOVIE

PLAY

CARD

SETUP

MODE

SETUP

FUNCTION

MOVIE

INDEX

MOVIE

EDIT

4, 5

Summary of Contents for 202192 - Ultra Zoom Accessory





















































































































































































































Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands

Olympus 202192 - Ultra Zoom Accessory, Instructions Manual

Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Related manuals for 202192 - Ultra Zoom Accessory

Brands by name

Popular brands