Olympus 202192 - Ultra Zoom Accessory Instructions Manual Download Page 132

Page: 132 / 212

132

RECORDING—brightness/exposure (cont.)

Metering the Average Brightness ~ Multi-Metering

Meters the brightness of the subject at up to 8 different points to set the cor-
rect exposure based on the average brightness.

Press

(Metering mode button)

and select

(Center-weighted

averaging metering) or

(Spot

Metering). (P.100)

Press

●

The Menu screen appears.

Press

on the Arrow pad,

and select "MULTI METERING",
then press

Press

and select "ON", then

press the OK button.

Press the OK button again.

●

The setting is stored and the Menu
screen disappears, then the normal
screen comes back on.

3, 4

4, 5

[

2 / 5

]

F2.8 1/800 0.0

BKT

MULTI

METERING

SLOW

OFF

Still Picture Recording Menu

Summary of Contents for 202192 - Ultra Zoom Accessory





















































































































































































































Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews:

Olympus 202192 - Ultra Zoom Accessory, Instructions Manual, Page: 132 / 212

Search results

Summary of Contents for 202192 - Ultra Zoom Accessory

Reviews: