20
The remote party who called listens to the prerecorded
message on the answering machine
If a remote party
called to talk.
If a FAX
MACHINE called.
If a remote party
called to send a
fax.
Your fax machine
is automatically
set for reception.
The remote party
leaves a message
after the beep.
The remote party
presses the trans-
mission start key.
Your fax machine
is automatically
set for reception.
After the number of
rings of the answering machine
PROGRAMMING ONE-TOUCH DIAL AND
SPEED DIALLING ...
As illustrated in “Particular dialling cases”, you can
program the fax machine to carry out the following rapid
dialling procedures:
•
One-touch dial
•
Speed dialling
One-touch dial...
You can associate a fax number, a name and a tel-
ephone number to each of the 10 one-touch dial nu-
meric keys (0 - 9). The number/name stored will be
selected automatically when you press the correspond-
ing key.
If you pick up the telephone receiver before the
second ring and hear the fax connection tone press
the START button and hang up the receiver. Your
fax machine is now ready to receive.
If your telephone installation has several sock-
ets, you can set your fax machine for remote re-
ception as explained in the “Manual Reception”
section.
If your telephone installation has several sock-
ets, you can pick up the line within 20 seconds,
even from a secondary set, as long as it works
with tone dialling.
• pick up the handset and press the keys * and # on
the telephone (to get a line).
Reception with an external answering
machine …
If your fax machine has an external answering machine
and, by pressing the RX MODE, you have set it to oper-
ate in this reception mode (the display must show “TAD/
FAX RX”), make sure that:
•
the answering machine is switched on.
•
the answering machine will start working within 5
ringing tones.
•
the silence lapse (the time after which the answer-
ing machine hangs up if it does not detect either a
reply message or the connection tones) set on the
answering machine is longer than the one set
on the fax machine (the time set on your fax ma-
chine is 6 seconds; to change it, see “Changing the
silence lapse” chapter "For a more sophisticated
use").
•
the message recorded in the answering machine
does not exceed 15-20 seconds.
With this reception mode, your fax machine’s behavour
depends on the caller as shown in the following diagram:
-3-10-27.p65
25/02/00, 9.16
20
