Olivetti OFX 520, Instruction Manual

Page: 33 / 67

23
Follow the procedure "Associating a fax number" for
one-touch dial (taking into account the changes for speed
dialling) until step 6; then proceed as follows:
Procedure DISPLAY
1
Press the > key. TEL NO.
2 Press the START key. 01: TEL NO.
_
3 Dial your remote party
telephone number
directly on the numeric
keypad of your fax and
press the START key
to confirm the setting.
From this step on the
procedure continues as
described previously.
01: NAME
_
If you want, you can print the information stored in the
10 one-touch dial numeric keys and in the 32 speed
dialling codes (see the section "Reports and Lists"
in this chapter). In this way, you can check the correct-
ness of the stored numbers (fax and telephone) and
the other information (remote party's name, trans-
mission speed, etc.). You can also check which keys/
codes have been programmed and which are still
free.
TRANSMITTING WITH ONE-TOUCH DIAL ...
All that is required is this diagram:
è
As in normal transmission (see “Transmitting a docu-
ment”), you can set contrast and resolution before
starting the transmission.
If you press the desired numeric key (in the example, 1)
for over a second, the associated fax number as well as
the name, if stored, will be displayed.
Once the number has been dialled, the transmission pro-
ceeds as already described.
TRANSMITTING WITH SPEED DIALLING ...
All that is required is this diagram:
è è è
As in normal transmission (see "Transmitting a docu-
ment"), you can set contrast and resolution before
starting the transmission operation.
As soon as you have pressed the S.DIAL key followed
by the speed dialling code (in the example 01), the as-
sociated fax number as well as the name, if stored, will
be displayed.
Once the number has been dialled, transmission pro-
ceeds as described in "Transmitting a document".
TRANSMITTING WITH ONE-TOUCH DIAL OR
SPEED DIALLING BY SEARCHING IN THE
ASSOCIATED LISTS ...
If you cannot remember the one-touch dial numeric key
or the speed dialling code you associated to a fax
number, you can still start the transmission by looking
it up in the associated lists, as follows:
If this diagram is not enough:
è è è
follow this procedure:
-3-10-27.p65 25/02/00, 9.16 23