Olivetti OFX 520, Instruction Manual

Page: 43 / 67

33
Procedure DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
TAD/FAX RX
30-03-99 12:55
2 Press the FUNCTION
key until the display
shows --->.
INSTALLATION
3 Press the START key. TEL. LINE SET-UP
4 Press the START key
until the display shows
--->.
SILENCE LAPSE: 6
5 Press the </> keys to
show the other values
available: "3", "4", "8",
"10" and "NO". (In the
example: "4").
SILENCE LAPSE: 4
6 Press the START key
to confirm your
selection, then the
STOP key to restore
the fax to the initial
waiting mode.
TAD/FAX RX
30-03-99 12:55
Changing the beeper duration ...
When the fax machine is set to automatic reception
with call type recognition, it behaves as follows:
• If a fax is calling, it will receive automatically after
the set number of rings
• If a telephone device is calling, it will beep for 20
seconds, after which, if you still have not lifted up
the receiver, it will receive automatically.
You can change the beeper duration as follows:
Procedure DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
PHONE/FAX RX
30-03-99 12:55
2 Press the FUNCTION
key until the display
shows --->.
INSTALLATION
3 Press the START key. TEL. LINE SET-UP
4 Press the START key
until the display shows
--->.
FAX/TEL TIMER: 20
5 Press the </> keys to
show the other values
available: "15", "30" e
"40". (In the example:
"15").
FAX/TEL TIMER: 15
6 Press the START key
to confirm your
selection, then the
STOP key to restore
the fax to the initial
waiting mode.
PHONE/FAX RX
30-03-99 12:55
Changing the silence lapse ...
This feature is enabled only in some countries.
Remember that if the silence lapse set on the answer-
ing machine is inferior to that set on your fax, the
latter will never be able to function automatically in re-
ception as the answering machine starts operating first
and as the fax does not hear any answering message,
within the set time lapse, it interrupts the connection.
You must decrease the value of the silence lapse on
your fax so that it can connect to the line first.
To change the silence lapse value on your fax, proceed
as follows:
-6-31-38.p65 25/02/00, 9.19 33