Olivetti NETTUNA 7000 Open, Service Manual

Page: 80 / 84

6. Remove the spring (1) and push the near-end-of-paper sensor (2) in the direction indicated by the arrow.
2
1
Figure 4-41
7. Remove the near-end-of-paper sensor (2) from its lockdown seat (1) as shown in the figure, and extract the wire
for connecting with the motherboard.
2
4-22 Service Manual
Y117850-4
Figure 4-42
To reassemble follow the same procedures in reverse order, putting back the cable holder as indicated in the section
“DISASSEMBLING THE PRINTHEAD”.
1