Olivetti NETTUNA 7000 Open, Service Manual

Page: 65 / 84

DISASSEMBLING THE CUTTER MOTOR AND SENSOR
The operation described in this section can be displayed by clicking on the link:
CUTTER MOTOR AND SENSOR DISASSEMBLY
To remove the motor and sensors of the mobile blade and the automatic cutter, proceed as follows:
1. Disassemble the printer assy. See “ DISASSEMBLING THE PRINTER GROUP” .
2. Press on the lever to raise the Clam as described in the section “ DISASSEMBLING THE PAPER FEED
ROLLER” .
3. Remove the cover of the cutter motor compartment as described in the section “ DISASSEMBLING THE
PAPER FEED ROLLER”.
4. Remove the retaining ring (1) fastening on the control lever of the mobile blade (2).
5. Extract the control lever of the mobile blade (2) in the direction indicated by the arrow.
1
2
Figure 4-11
6. Undo the fixing screws (1) of the cutter motor and photosensor unit (2).
7.
Lift upwards the assy (2) together with its wiring and remove.
4-7 Service Manual
Y117850-4
Figure 4-12
1
2