DISASSEMBLING THE PAPER SENSOR
The operation described in this section can be displayed by clicking on the link:
PAPER SENSOR DISASSEMBLY.MP4
To remove the paper detection sensor, proceed as follows:
1.
Disassemble the printer assy. See
“
DISASSEMBLING THE PRINTER GROUP”
.
2.
Press on the lever to raise the Clam as described in the section “
DISASSEMBLING THE PAPER FEED
ROLLER”.
3.
With a pair of pliers, extract the paper detection sensor (1) in the direction indicated by the arrow, being very
careful not to damage the printer roller.
4-9
Service Manual
Y117850-4
Figure 4-15
4.
Remove the connector for connecting with the motherboard.
To reassemble follow the same procedures in reverse order.
NOTE: after the Cash Register has been completely reassembled perform the printer unit photosensors calibration
using the Diagnostic Tool “
DiagNettuna7000I 1.00.04.0.2
” or later version.
1
Summary of Contents for NETTUNA 7000 Open
