31
Service Guide
Replacing Parts
8
Before you leave the customer site, verify the Fiery ES operation.
•
Connect the Fiery ES to the network (see
).
•
Ask the site administrator to check the Setup options (see
Configuration and Setup
).
•
Power on the Fiery ES, and then the printer. Wait for the Fiery ES LED display to reach and remain at 00; then wait
for the Fiery icon to become active (see
).
•
In the event of an error condition, see the Startup section of the table on
. If the Fiery icon does not become
active after 10 minutes, check and reseat all external cables; make sure that the cables are connected to the correct
ports. If image quality is poor, test the printer (see the service documentation that accompanies the printer).
Y119660-9
Service Guide