23
Service Guide: Fiery® ES IC-420
Replacing Parts
5
Reassemble the Fiery ES and verify its functionality (see
Hard disk drive (HDD)
The factory-installed HDD is formatted and loaded with system software, network drivers, and printer fonts. The HDD is
also used to store spooled print jobs.
If you must replace the HDD, you must install the system software on the new HDD. If you are replacing the HDD, you
need:
•
The appropriate system software
•
The latest version of user software (for networked computers that will print to the Fiery ES)
For information about installing system software, see
.
Proper handling
•
Use standard ESD precautions when grounding yourself and the Fiery ES.
•
Keep magnets and magnetic-sensitive objects away from the HDD.
•
Do not remove the screws on top of the HDD. Loosening these screws voids the warranty.
•
Never drop, shake, bump, or put excessive pressure on the HDD.
•
Handle the HDD by the sides and avoid touching the printed circuit boards.
•
Allow the HDD to reach room temperature before installation.
HDD problems may be caused by the following:
•
Loose or faulty connection
•
Faulty HDD (bad sectors, read/write errors, or physical damage)
To remove the HDD
1
If you are replacing the HDD with a new HDD, allow the site administrator the opportunity to print the Job Log and
save any custom simulation and output profiles. If possible, print the following:
•
Configuration pages: Provide records of any installed options and the customer’s current Setup configuration.
•
Font List: Lists the fonts currently on the HDD. Along with the fonts provided, the customer may have installed
additional fonts.
For information about how to print the Configuration page and Font List, see
Configuration and Setup
, which is part of
the user documentation set.
2
Access and open the Fiery ES, as described on
Important:
Improper handling can damage the HDD. Handle the HDD with extreme care:
Y119660-9
Service Guide