Olivetti d-Copia 1600, Operation Manual

Page: 16 / 604

x OPERATION GUIDE
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
If the floor is delicate, when this product is moved after installation, the floor
material may be damaged.
During copying, some ozone is released, but the amount will not cause any
ill effect to one's health. If, however, the copier is used over a long period
of time in a poorly ventilated room or when making an extremely large
number of copies, the smell may become unpleasant. To maintain the
appropriate environment for copy work, it is suggested that the room be
properly ventilated.
Power supply/Grounding the copier
Warning
DO NOT use a power supply with a voltage other than that
specified. Avoid multiple connections in the same outlet. These
types of situations present a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects
come in contact with the prongs on the plug, it may cause a fire
or electric shock.
Always connect the copier to an outlet with a ground connection
to avoid the danger of fire or electrical shock in case of an
electric short. If an earth connection is not possible, contact your
service representative.
Other precautions
Connect the power plug to the outlet closest to the copier.
The power supply cord is used as the main disconnect device. Ensure that
the socket/outlet is located/installed near the equipment and is easily
accessible.
Handling of plastic bags
Warning
Keep the plastic bags that are used with the copier away from
children. The plastic may cling to their nose and mouth causing
suffocation.