Olivetti d-Color MF45, Operation Manual

Page: 332 / 656

6 Troubleshooting
6-50 MF45
If any message other than those listed above appears, perform the operation
described in the message.
Please insert Fusing Unit
and close all doors. The fusing unit is not installed
correctly. Reinstall the supplies or parts, or
contact your technical representa-
tive.
Toner cartridge is not set
properly. Be sure that
the lever is pulled up. The indicated toner cartridge
is not installed correctly.
Please insert Waste Ton-
er Box and close all
doors. The waste-toner box is not in-
stalled correctly.
Please insert Image
Transfer Belt Unit and
close all doors. The image transfer belt unit is
not installed correctly.
Replenish paper. The indicated drawer has run
out of paper. Load paper into the indicated draw-
er. (See “Loading paper into the 1st
drawer” on page 3-46, “Loading pa-
per into the 2nd, 3rd or 4th drawer”
on page 3-51, “Loading paper into
the LCT” on page 3-54, and “Load-
ing paper into the bypass tray” on
page 3-57.)
Toner cartridge (X) needs
to be replaced soon. The toner for the indicated
color is about to run out. Prepare to replace the toner car-
tridge according to your mainte-
nance agreement.
Replace the Toner Car-
tridge. Since the toner for the indi-
cated color has run out, the
machine is unable to make
copies. Replace the toner cartridge accord-
ing to your maintenance agreement.
Stapler empty. Replace
Staple Cartridge or can-
cel Staple mode. The staples have run out. Replace the staple cartridge. See
“Replacing the staples” on
page 10-10.
Misfeed detected. Since a paper misfeed oc-
curred, the machine is unable
to make copies. Clear the paper misfeed. (See
“When the message “Misfeed de-
tected.” appears” on page 6-7.)
Reinsert the following #
of originals. After clearing a paper mis-
feed, it is necessary to reload
certain pages of the docu-
ment that have already been
fed through the ADF. Load the indicated document pages
into the ADF.
Malfunction detected.
Please call your Techni-
cal Representative. The machine malfunctioned
and is unable to make copies. Inform your technical representative
of the code displayed on the touch
panel.
Now Downloading Pro-
gram Data from
Firmware server. À CS Remote Care was acti-
vated by the technical repre-
sentative.
Á Internet ISW is being down-
loaded. Do not turn off the machine with the
auxiliary power button while this
message is displayed.
After turning off the machine with
the auxiliary power button, turn off
the main power switch, and then
contact the technical representa-
tive.
Message Cause Remedy