background image

Useful transmission functions (G3 fax)

3-14

Useful transmission functions (G3 fax)

With [Comm. Method] in the [Comm. Settings] screen, useful transmission 
functions can be specified.

"

For details on [Polling RX], refer to “Polling reception (G3 fax)” on 
page 4-6.

[Timer TX]

A timer transmission can be specified.
Timer transmission is the function for sending a fax at a specified time. Multi-
ple destinations can be specified. A maximum of 16 timer transmissions 
(including transmissions being redialed) can be queued.
To send a timer transmission, press [Yes], and then use the keypad to type in 
the transmission time. The time can be set in hours and minutes. The day 
cannot be specified.

"

In order to send a timer transmission, the date and time must first be 
specified on the machine. For details on the date and time settings, 
refer to the [Printer/Copier/Scanner User

s Guide].

"

This function cannot be used together with Internet fax transmissions 
or polling reception.

"

If information was incorrectly entered, press the [C] key to erase the 
entered information.

"

If the machine is off at the specified TX Start Time, the fax will be sent 
the next time that the machine is turned on.

"

For details on canceling a queued transmission job, refer to “Cancel-
ing a queued transmission” on page 3-23.

Summary of Contents for d-COLOR MF3000














































































































































Reviews: