Olivetti d-COLOR MF3000, Operation Manual

Page: 39 / 141

[Fax Settings] (Admin Settings) 2-13
[Fax Function Settings]
[Tray Selection for
RX Print] Settings [Auto] / [Tray 1] / [Tray 2] / [Tray 3] /
[Tray 4]
Select the paper drawer to be used when a specific
paper drawer is used for printing received docu-
ments.
"
[Tray 3] and [Tray 4] do not appear if the
optional lower feeder units have not been
installed.
[Min. Reduction for
RX Print] Settings [87%] - [96%] / [100%]
Specify the reduction ratio (%) used for printing
received documents.
[Print Separate Fax
Pages] Settings [ON] / [OFF]
Select whether or not pages are split when the
received document is longer than the standard paper
size.
When [Duplex Print (RX)] is set to [ON], this parame-
ter does not appear.
[Duplex Print (RX)] Settings [ON] / [OFF]
Select whether or not received documents are printed
on both sides of paper.
When [Print Separate Fax Pages] is set to [ON], this
parameter does not appear.
Item Description
[F-Code TX] Settings [ON] / [OFF]
Select whether or not F-code transmissions are used.
[Dest. Check Display
Func.] Settings [ON] / [OFF]
Select whether or not the list of specified destinations
is printed before the fax is sent.
Item Description