Olivetti d-Color MF2552 plus, Service Manual, Page: 191 / 740

2NP
1-3-105
U241 Checking the operation of the switches of the finisher
Description
Displays the status of each switches and sensors of 1000-sheet finisher.
Purpose
To check the operation of each switches and sensors of the 1000-sheet finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Method: [Finisher]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Item No. Description
Display Description
Finisher Checking the switch and sensor of the document finisher
Mail Box Checking the switch and sensor of the mailbox
Punch Checking the switch and sensor of the punch unit
Display Description
Front Cover DF front cover switch (DFFCSW)
Top Cover DF top cover switch (DFTCSW)
Tray U-Limit DF tray sensor 1 (DFTS1)
Tray Middle DF tray sensor 3 (DFTS3)
Tray L-Limit DF tray sensor 4 (DFTS4)
Tray Top DF tray upper surface sensor (DFTUSS)
HP DF paper entry sensor (DFPES)
Middle Tray Eject DF middle eject sensor (DFMES)
Staple HP DF slide sensor (DFSLS)
Middle Tray DF middle tray sensor (DFMTS)
Width Front HP DF side registration sensor 1 (DFSRS1)
Width Tail HP DF side registration sensor 2 (DFSRS2)
Bundle Eject HP DF bundle discharge sensor (DFBDS)
Lead Paddle DF paddle sensor (DFPDS)
Shift Tail HP DF shift sensor 2 (DFSFS2)
Shift Unlock HP DF shift release sensor (DFSFRS)
Sub Tray Full DF sub tray full sensor (DFSTFS)
Shift Set DF shift set sensor (DFSFSS)
Se
r
vice Manual Y1
16
1
41-8