Oliver 6510, Owner'S Manual

Page: 13 / 38

4. OPERATION 4-3
SWITCH NAME FUNCTION
7
SA4
MILLING SPINDLE
STOP SWITCH
Press this switch to stop the milling
spindle.
8
MILL HEAD TRAVEL
MANUAL START
SWITCH
When the operate mode selection
switch are set to right position. The
switch must be pressed for start
automatic return travel.
9
EMERGENCY STOP
In the event of any abnormality
occurring during operation, the
machine should be stopped
immediately.
4.1.2. OPERATION STOP
Depressing the red stop button performs it.
4.1.3. EMERGENCY STOP
At any time depressing the mushroom shaped emergency push button can disconnect
power. Power is restored pulling out the cap.